INNO-CONS COMPANY (Thaland)
Tel : +66 2524 0778-9
Email : info@topglass-frp.com
300/68 Moo 1 T.Tasit A.Pluakdag Rayong 21140
     Where there is possibility of FRP translucent fiberglass roofing sheets posing a danger to foot traffic on the roof or a possibility of not being able to install safety netting under the FRP transluceent fiberglass roofing sheets. Alsynite NZ and I-Cons Asia had jointly developed a heavy duty and high impact roof lighting system to alleviate these concerns.
     Aptly named Topglass GC Ultra-Safe, the product utilises a heavy duty, woven roving reinforcing system positioned within the resin matrix, thereby providing exceptional strength. This made Topglass GC Ultra-Safe trafficabl after meeting the impact strength tests of AS 4256.3 clause 11.3, AS 4040.4:1996
Specification
Color
Opal, Clear Green
Top Film
Topglass® weather surface polyester coating incorporates UV inhibitors 30 micron
Coat
EXO-SET® 205 + Reinforced Glass
Visible Light And Solar Transmission
Weight
Opal
Light
Solar
SC
Clear Green
Light
Solar
SC
3660g/m2 (2.5mm)
40%
30%
0.45
60%
53%
0.69
Feature
• Trafficable FRP where safety wire mesh below FRP is not available
• Meets impact strenght requiment specified by AS/NZS 4040.4:1996
• GC 100 microns coating thickness andUltimate UV Absorber by UVAS+
Application
• Educational facilities and Public Assembly areas where there is a danger of person climbing onto a roof.
• Fertilizer Plants.
• Chemical and Powder-coating Plants.
• Wastewater treatment plants.
• Salt Extraction Facilities.
• Severe marine environments.
• Natural roof lighting where safety mesh is not installed.
• Wood, Pulp and Paper Plants.
Warranty
Water Penetration Light Transmission Non Fibre Show
30 25 25
Safety


     Whilst Topglass GC Ultra-Safe is classified as heavy duty, meets the impact test of AS 4040, satisfying the requiments of AS 4256.3, and can support foot traffic, long term degradation and or post roof installation impact damage can seriously affect the performance of the sheeting. In order to comply with the requirements of AS 1562.3:2006 Part 3 Plastic, protect the water surface coating and provide continual structural strenght, all FRP products should be protected from foot traffic, therefore a suitable proprietary aluminium wlakway is always recommended.


Certification

     I-Cons Asia Co., Ltd. takes particular pride its JAS-ANZ Certification under the Benchmark Certification scheme. Recognised in over 90 countriew and providing security in every respect to customers, JAS-ANZ certification not only guarantees accurate systems process, and unlike other Quality Standard schemes,
JAS-ANZ Certification also has the added advantage of ensuring our customers always receive consistent and monitored quality product, legally certified to AS/NZS 4256. Patrs 1 and 3.

     Being a manufacturer in the Kingdom of Thailand, I-Ccons Asia Co., Ltd. is also a certified manufacturer of FRP by the Thailand industrial Standard certification body obtaining the TIS 612-2549(2006) for Glass Fibre Reinforced Polyester Sheets. Like the JAS-ANZ certification this also unsures that all products have traceabillity all the way from each raw material through each step of process to finished goods.